Installation Procedure
WARNING: This page is about a different car, the 2004 Buick Regal and 2004 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.
- position the wiper transmission to the wiper drive system module tube frame.
- Install wiper transmission screws.
Tighten: Tighten the screws to 9 N.m (80 lb in).
- Install the wiper transmission caps.
- Install the wiper drive system module. Refer to Wiper Drive System Module Replacement .
- Install the air inlet grille panel. Refer to Air Inlet Grille Panel Replacement in Body Front End.
- Operate the windshield wipers and inspect for proper operation.
NOTE:
Refer to Fastener Notice in Cautions and Notices.