FixVault
Home › Buick › 2003 › Century Custom › Repair and Diagnosis › Accessories & Equipment › Cruise Control Systems › Repair Instructions › Cruise Release Switch Replacement › Installation Procedure

Installation Procedure

  1. Install the cruise release switch to the cruise release switch retainer on the brake pedal bracket.
  2. Connect the cruise release switch electrical connector.
    3. Fig 1: Connecting Cruise Release Switch Electrical Connector
    G01587659Courtesy of GENERAL MOTORS CORP.
  3. Adjust the cruise release switch. Refer to CRUISE RELEASE SWITCH ADJUSTMENT  .
  4. Install the left side instrument panel insulator. Refer to CLOSEOUT/INSULATOR PANEL REPLACEMENT - LEFT in Instrument Panel, Gages and Console.
About FixVault