FixVault
Home › Buick › 2003 › Century Custom › Repair and Diagnosis › Accessories & Equipment › Wiper/Washer Systems › Wiper System And Washer System › Repair Instructions › Washer Solvent Container Level Sensor Replacement › Installation Procedure

Installation Procedure

  1. Position the seal to the washer solvent container, pressing in until fully seated.
  2. Position the washer solvent level sensor to the washer solvent container, pressing in until fully seated.
  3. Connect the washer solvent level sensor electrical connector.
    Fig 1: Connecting Washer Solvent Level Sensor Electrical Connector
    G01587191Courtesy of GENERAL MOTORS CORP.
  4. Install the right front fender liner. Refer to FRONT FENDER LINER REPLACEMENT in Body Front End.
  5. Fill the washer solvent container with washer solvent.
About FixVault