FixVault
Home › Buick › 2003 › Century Custom › Repair and Diagnosis › Accessories & Equipment › Wiper/Washer Systems › Wiper System And Washer System › Repair Instructions › Washer Solvent Container Level Sensor Replacement › Removal Procedure

Removal Procedure

  1. Drain the washer solvent from the washer solvent container.
  2. Remove the right front fender liner. Refer to FRONT FENDER LINER REPLACEMENT in Body Front End.
  3. Disconnect the washer solvent container level sensor electrical connector.
    Fig 1: Disconnecting Washer Solvent Container Level Sensor Electrical Connector
    G01587190Courtesy of GENERAL MOTORS CORP.
  4. Using a small flat-bladed tool, remove the washer solvent level sensor from the washer solvent container.
  5. Using a small flat-bladed tool, remove the seal from the washer solvent container.
About FixVault