FixVault
Home › Buick › 2003 › Park Avenue Base › Repair and Diagnosis › Accessories & Equipment › Communication Devices › Body Control System › Repair Instructions › Instrument Panel Module Replacement › Removal Procedure

Removal Procedure

  1. Disconnect the negative battery cable. Refer to BATTERY NEGATIVE CABLE DISCONNECT/CONNECT PROCEDURE (TOP POST) in Engine Electrical.
  2. Open and lower the instrument panel compartment by carefully releasing the rear holding tabs.
  3. Pull down in order to remove the instrument panel module (IPM) (1).
  4. Disconnect the electrical connectors from the IPM.
    Fig 1: Removing Instrument Panel Module
    G01525979Courtesy of GENERAL MOTORS CORP.
About FixVault