Removal Procedure

Insert a flat-bladed tool under the front edge of the switch plate.

Fig 1: Removing Front Edge Of Switch Plate From Door Trim Panel
Courtesy of GENERAL MOTORS CORP.
Gently pry upwards in order to release the front edge of the switch plate from the door trim panel.
Slide the switch forward in order to release the rear retainer tabs.
Disconnect the electrical connectors.
Remove the switch pack (2) from the switch plate (1) by releasing the retainer tabs with a small flat-bladed tool.

Fig 2: Removing Switch Pack From Switch Plate
Courtesy of GENERAL MOTORS CORP.