FixVault
Home › Buick › 2004 › Century Base › Repair and Diagnosis › Accessories & Equipment › Cruise Control Systems › Repair Instructions › Cruise Control Cable Replacement (3.8L) › Installation Procedure

Installation Procedure

  1. Install the cruise control cable to the engine.
  2. Install the cruise control cable to the throttle lever and the accelerator control cable bracket.
  3. Install the cruise control cable to the cruise control retainers.
    4. Fig 1: Identifying Cruise Control Cable
    GM319387Courtesy of GENERAL MOTORS CORP.
  4. Install the cruise control cable to the cruise control module strap.
    5. Fig 2: Accelerator Cable To Retaining Clips
    GM12717Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Ensure the cruise control module strap is not twisted during installation of the cruise control cable.
  5. Rotate the cruise control cable clockwise.

    Install the cruise control cable to the cruise control module.

    6. Fig 3: Cruise Control Cable At Cruise Control Module
    GM294519Courtesy of GENERAL MOTORS CORP.
About FixVault