FixVault
Home › Buick › 2004 › Century Base › Repair and Diagnosis › Electrical › Charging Systems › Battery, Charging System And Starting System › Repair Instructions › Battery Tray Replacement › Installation Procedure

Installation Procedure

    Fig 1: Battery Tray & Bolts
    GM461887Courtesy of GENERAL MOTORS CORP.
  1. Install the battery tray.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the battery tray bolts.

    Tighten:  Tighten the battery tray bolts to 5 N.m (44 lb in).

  3. Install the battery. Refer to Battery Replacement .
  4. Connect the negative battery cable. Refer to Battery Negative Cable Disconnect/Connect Procedure .
About FixVault