FixVault
Home › Buick › 2004 › Century Base › Repair and Diagnosis › Electrical › Instrument Panel System Displays, Gauges And Console › Repair Instructions › Steering Column Filler Replacement › Installation Procedure

Installation Procedure

  1. Connect the electrical connector to the driver information center (DIC), if equipped.
    2. Fig 1: Steering Column Filler & Bolts
    GM326114Courtesy of GENERAL MOTORS CORP.
  2. Align the retaining clips and the locating pins on the steering column filler to the slots in the IP.
  3. Press the steering column filler in order to lock in the retainers.
    4. NOTE: Refer to Fastener Notice in Cautions and Notices.
  4. Install the bolts to the bottom of the steering column filler.

    Tighten:  Tighten the bolts to 2 N.m (18 lb in).

  5. Install the left instrument panel insulator. Refer to Closeout/Insulator Panel Replacement - Left .
About FixVault