FixVault
Home › Buick › 2004 › Century Base › Repair and Diagnosis › External Pages › Different car › Section 86 (Engine Controls 3.8L (Introduction, Service & Replacement)) › Repair Instructions › Intake Air Temperature (IAT) Sensor Replacement › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Locating Intake Air Temperature Sensor Components
    GM760425Courtesy of GENERAL MOTORS CORP.
  1. Install the IAT sensor (3).
  2. Connect the IAT sensor electrical connector.
About FixVault