FixVault
Home › Buick › 2004 › Century Limited › Repair and Diagnosis › Body & Frame › Seats › Seat System › Repair Instructions › Heated Seat Control Module Replacement - Front › Removal Procedure

Removal Procedure

  1. Position the seat to the full-up position.
    Fig 1: Heated Seat Control Module & Retaining Pin
    GM909553Courtesy of GENERAL MOTORS CORP.
  2. Remove the bolts that secure the front seat frame to the floor.
  3. Rotate the seat forward to access the heater module.
  4. Disconnect the seat electrical harness connector.
  5. Pinch the retaining pin (2) together and pull the module (1) out from the seat inboard frame.
    6. Fig 2: Heated Seat Control Module & Electrical Harness Connector
    GM816209Courtesy of GENERAL MOTORS CORP.
  6. Disconnect the electrical harness connector (1) from the heater module (2).
  7. Remove the heater module from the front seat.
About FixVault