FixVault
Home › Buick › 2004 › LeSabre Custom, 4T65E/MN3 › Repair and Diagnosis › Body & Frame › Seats › Seat System › Repair Instructions › Heated Seat Control Module Replacement - Front › Removal Procedure

Removal Procedure

  1. Disable the SIR system. Refer toSIR Disabling and Enabling Zone 7 or SIR Disabling and Enabling Zone 9 in SIR.
  2. Remove the fasteners securing the seat cushion to the adjuster track. Refer to Seat Cushion Replacement - Front .
    3. Fig 1: View of Heated Seat Module
    GM430379Courtesy of GENERAL MOTORS CORP.
  3. Lift the front of the seat cushion up in order to gain access to the heated seat module (1).
    4. NOTE: Refer to Electrical Wiring Routing Notice in Cautions and Notices.
    Fig 2: View of Electrical Connectors, Fasteners & Heated Seat Module
    GM430383Courtesy of GENERAL MOTORS CORP.
  4. Disconnect the electrical connectors (3) from the heated seat module.
  5. Remove the fasteners (1) securing the heated seat module to the bottom of the seat cushion.
  6. Remove the heated seat module (2) from the bottom of the seat cushion.
About FixVault