Scan Tool Data Definitions
- 8 Digit GM Part Number
-
The scan tool displays an 8 digit number which indicates the GM part number of the module.
- Battery Voltage
-
The scan tool displays the current state of the battery in volts.
- Calibration ID
-
The scan tool displays a 4 digit number which indicates the calibration ID number of the module.
- Horn Output
-
The scan tool displays On/Off to indicate the current state of the horn as commanded by the dash integration module (DIM).
- Julian Date of Build
-
The scan tool displays a 3 digit number which indicates the Julian date of build of the module.
- PROM ID
-
The scan tool displays a 4 digit number that identifies the PROM.
- Year Module Built
-
The scan tool displays a 4 digit number which indicates the year the module was built.