FixVault
Home › Buick › 2004 › Park Avenue Base › Repair and Diagnosis › Accessories & Equipment › Communication Devices › Body Control System › Repair Instructions › Instrument Panel Module Replacement › Removal Procedure

Removal Procedure

  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnect/Connect Procedure (Top Post) in Engine Electrical.
  2. Open and lower the instrument panel compartment by carefully releasing the rear holding tabs.
    3. Fig 1: Removing/Installing Instrument Panel Module
    GM262477Courtesy of GENERAL MOTORS CORP.
  3. Pull down in order to remove the instrument panel module (IPM) (1).
  4. Disconnect the electrical connectors from the IPM.
About FixVault