FixVault
Home › Buick › 2004 › Park Avenue Base › Repair and Diagnosis › Body & Frame › Door Locks › Keyless Entry System › Repair Instructions › Remote Control Door Lock Receiver Replacement › Installation Procedure

Installation Procedure

    Fig 1: Removing/Installing RFA Module From Rear Shelf
    GM599887Courtesy of GENERAL MOTORS CORP.
  1. Position the RFA module (1) into the shelf.
  2. Install the module retainers (2).
  3. Connect the electrical connector.
  4. Install rear storage compartment trim. Refer to Compartment Trim Panel Replacement - Rear in Body Rear End.
  5. Program RFA module. Refer to Transmitter Programming .
About FixVault