FixVault

Installation Procedure

    Fig 1: Removing/Installing Lateral Accelerometer
    GM538033Courtesy of GENERAL MOTORS CORP.
  1. Install the lateral accelerometer sensor (3).
  2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the 2 lateral accelerometer sensor mounting screws (1).

    Tighten:  Tighten the 2 lateral accelerometer sensor mounting screws to 2.4 N.m (21 in. lb).

  4. Connect the lateral accelerometer sensor electrical connector (2).
  5. Install the rear seat cushion. Refer to Seat Cushion Replacement - Rear in Seats.
  6. Perform the ABS Diagnostic System Check. Refer to Diagnostic System Check - ABS .