FixVault
Home › Buick › 2004 › Regal LS › Repair and Diagnosis › External Pages › Different car › Section 86 (Engine Controls 3.1L (Introduction, Service & Replacement)) › Repair Instructions › Intake Air Temperature (IAT) Sensor Replacement › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Locating Air Cleaner Intake Duct Components
    GM811623Courtesy of GENERAL MOTORS CORP.
  1. Install the IAT sensor (1).
  2. Connect the IAT sensor electrical connector (3).
About FixVault