Installation Procedure

Carefully clean the throttle body mounting surfaces of any gasket and/or seal material.

Fig 1: Identifying Throttle Body Bolts

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the throttle body bolts.
Tighten: Tighten the throttle body bolts to 10 N.m (89 lb in).

Fig 2: Locating Throttle Body Electrical Connector

Courtesy of GENERAL MOTORS CORP.

Install the throttle body electrical connector.
Install the air cleaner intake duct. Refer to Air Cleaner Intake Duct Replacement .
Perform the idle learn procedure. Refer to Idle Learn Procedure .
Use the scan tool to clear all DTCs.