FixVault
Home › Buick › 2005 › Allure CXS › Repair and Diagnosis › External Pages › Different car › Section 14 (Engine Controls - Introduction) › Repair Instructions › Fuel Tank Pressure Sensor Replacement › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2005 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Fuel Sender & Fuel Pressure Sensor Electrical Connectors
    GM863091Courtesy of GENERAL MOTORS CORP.
  1. Install the fuel pressure sensor.
  2. Install the fuel tank. Refer to Fuel Tank Replacement .
About FixVault