FixVault
Home › Buick › 2005 › Century Base › Repair and Diagnosis › Engine Mechanical › Engine Exhaust System › Repair Instructions › Catalytic Converter Heat Shield Replacement › Removal Procedure

Removal Procedure

    Fig 1: Locating Oxygen Sensor Wiring Harness
    GM195267Courtesy of GENERAL MOTORS CORP.
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
    2. NOTE: Refer to Catalytic Converter Movement Notice in Cautions and Notices.
  2. Support the exhaust system.
  3. Remove the catalytic converter. Refer to Catalytic Converter Replacement (3.1L) .
  4. Remove the oxygen sensor wiring harness (3) from the catalytic converter heat shield.
    5. Fig 2: View Of Catalytic Converter Heat Shield
    GM289490Courtesy of GENERAL MOTORS CORP.
  5. Remove the catalytic converter heat shield rivets.
  6. Remove the catalytic converter heat shield.
About FixVault