FixVault
Home › Buick › 2005 › Century Base › Repair and Diagnosis › Engine Performance › System › Engine Controls - Introduction › Repair Instructions › Crankshaft Position (CKP) Sensor Replacement (7X) › Removal Procedure

Removal Procedure

    Fig 1: View Of CKP Sensor (7X)
    GM15969Courtesy of GENERAL MOTORS CORP.
  1. Turn the steering wheel fully to the left.
  2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  3. Remove the right tire and wheel. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
  4. Disconnect the crankshaft position (CKP) sensor electrical connector.
  5. Remove the CKP sensor bolt.
  6. Remove the CKP sensor.
  7. Inspect for wear, cracks, or leakage if the CKP sensor is not being replaced.
About FixVault