FixVault

Installation Procedure

WARNING: This page is about a different car, the 2004 Buick Regal and 2004 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the antenna cable as noted before removal.
  2. IMPORTANT: Ensure that the cable is secured to the harness at least every 150 mm (6 in) to aid in protecting and routing the cables.
  3. Use electrical tape in order to secure the extension cables along the outside of the wiring harness.
  4. Fig 1: Securing Extension Cables Along Outside Of Wiring Harness Using Electrical Tape
    GM362090Courtesy of GENERAL MOTORS CORP.
  5. Connect the I/P antenna extension cable to the body harness antenna cable along the front door hinge pillar.
  6. Install the right carpet.
  7. Install the lower trim panel to the right center pillar.
  8. Install the right rear carpet retainer. Refer to Carpet Retainer Replacement - Rear in Interior Trim.
  9. Install the right front carpet retainer. Refer to Carpet Retainer Replacement - Front in Interior Trim.
  10. Install the right I/P insulator. Refer to Closeout/Insulator Panel Replacement - Right in Instrument Panel, Gages, and Console.
  11. Install the rear seat cushion. Refer to Seat Cushion Replacement - Rear in Seats.
  12. Connect the antenna extension cable to the body harness antenna cable.
  13. Fig 2: Body Harness Antenna Extension Cable At Antenna Cable
    GM910399Courtesy of GENERAL MOTORS CORP.
  14. Install the right upper quarter trim panel. Refer to Trim Panel Replacement - Rear Quarter Upper in Interior Trim.