FixVault

Installation Procedure

WARNING: This page is about a different car, the 2004 Buick Regal and 2004 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the antenna extension cable as noted before removal.
  2. Fig 1: Antenna Extension Cable
    GM311055Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Ensure that the cable is secured to the harness at least every 150 mm (6 in) to aid in protecting and routing the cable.
  3. Use electrical tape in order to secure the extension cable along the outside of the wiring harness.
  4. Connect the I/P antenna extension cable to the radio. Install the radio. Refer to Radio Replacement .
  5. Connect the I/P antenna extension cable to the body harness antenna cable along the front door hinge pillar.
  6. Fig 2: I/P Antenna Extension Cable At Body Harness Antenna Cable
    GM815660Courtesy of GENERAL MOTORS CORP.
  7. Install the I/P compartment. Refer to Compartment Replacement - Instrument Panel (I/P) in Instrument Panel, Gages and Console.
  8. Install the right I/P insulator. Refer to Closeout/Insulator Panel Replacement - Right in Instrument Panel, Gages and Console.
  9. Install the right carpet.