FixVault
Home › Buick › 2005 › Century Base › Repair and Diagnosis › External Pages › Different car › Section 19 (Engine Controls 3.1L (Introduction, Service & Replacement)) › Repair Instructions › Fuel Strainer Replacement › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Fuel Pump & Sender Assembly Component View
    GM50636Courtesy of GENERAL MOTORS CORP.
  1. Install the new strainer (4) to the reservoir.
  2. Install the fuel sender assembly. Refer to Fuel Sender Assembly Replacement .
About FixVault