FixVault

Installation Procedure

WARNING: This page is about a different car, the 2004 Buick Regal and 2004 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Front Fog Lamp & Nuts
    GM324213Courtesy of GENERAL MOTORS CORP.
  1. Position the front fog lamp assembly to the front bumper impact bar.
  2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the front fog lamp nuts to the front bumper impact bar.

    Tighten:  Tighten the nuts to 10 N.m (89 lb in).

  4. Fig 2: Front Fog Lamp Bulb & Socket
    GM814142Courtesy of GENERAL MOTORS CORP.
  5. Install the fog lamp bulb/socket to the fog lamp by rotating clockwise.
  6. Fig 3: Front Fog Lamp Electrical Connector
    GM814141Courtesy of GENERAL MOTORS CORP.
  7. Connect the electrical connector to the front fog lamp assembly.
  8. Install the front bumper fascia deflector. Refer to Front Bumper Fascia Deflector Replacement - Side in Bumpers.
  9. Check and adjust the front fog lamp aim as necessary. Refer to Fog Lamp Aiming Procedure .