FixVault
Home › Buick › 2005 › Century Base › Repair and Diagnosis › External Pages › Different car › Section 8 (Lighting Systems) › Repair Instructions › Headlamp Switch Replacement › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Buick Regal and 2004 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.
  1. Pull the rearward edge of the access opening cover outboard on the left side of the instrument panel (I/P) to release the retainers. Use a plastic flat-bladed tool as an aid if necessary.
  2. Release the forward edge of the access opening cover from behind the hinge pillar and remove the cover.
    3. Fig 1: Headlamp Switch Screws
    GM506429Courtesy of GENERAL MOTORS CORP.
  3. Remove the headlamp switch screws.
    4. Fig 2: Headlamp Switch
    GM468735Courtesy of GENERAL MOTORS CORP.
  4. Carefully pull the headlamp switch outboard away from the I/P to access the electrical connector.
  5. Disconnect the electrical connector from the headlamp switch.
About FixVault