Installation Procedure

Fig 1: Holding Flywheel

Courtesy of GENERAL MOTORS CORP.

Install the J 37096 in order to gain access to the torque converter bolts and to prevent the flywheel from turning.

Fig 2: Identifying Flywheel To Torque Converter Bolts

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the flywheel to torque converter bolts.
Tighten: Tighten the bolts to 63 N.m (46 lb ft).

Fig 3: Removing/Installing Torque Converter Covers

Courtesy of GENERAL MOTORS CORP.

Install the torque converter covers.
Install the torque converter cover bolts.
Tighten: Tighten the bolts to 10 N.m (89 lb in)
Lower the vehicle.