FixVault
Home › Buick › 2005 › Century Base › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transaxle - Introduction & Repair Instructions › Repair Instructions › Pressure Control Solenoid (PCS) Replacement › Installation Procedure

Installation Procedure

    Fig 1: View Of Pressure Control Solenoid (PCS) Assembly
    GM49378Courtesy of GENERAL MOTORS CORP.
  1. Install the PCS (322).
  2. Install the PCS retaining clip (314E).
  3. Connect the PCS electrical connector.
  4. Install the case side cover. Refer to Case Side Cover Replacement .
About FixVault