FixVault
Home › Buick › 2005 › Century Base › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transaxle - Introduction & Repair Instructions › Repair Instructions › Torque Converter Cover Replacement › Installation Procedure

Installation Procedure

    Fig 1: Removing/Installing Torque Converter Covers
    GM631009Courtesy of GENERAL MOTORS CORP.
  1. Install the torque converter covers.
    2. NOTE: Refer to Fastener Notice in CAUTIONS AND NOTICES .
  2. Install the torque converter cover bolts.

    Tighten:  Tighten the bolts to 10 N.m (89 lb in).

  3. Lower the vehicle.
About FixVault