FixVault
Home › Buick › 2005 › Century Base › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transaxle - Introduction & Repair Instructions › Repair Instructions › Torque Converter Cover Replacement › Removal Procedure

Removal Procedure

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
    2. Fig 1: Removing/Installing Torque Converter Covers
    GM631009Courtesy of GENERAL MOTORS CORP.
  2. Remove the torque converter cover bolts.
  3. Remove the torque converter covers.
About FixVault