FixVault
Home › Buick › 2005 › LeSabre Custom, 4T65E/M15 › Repair and Diagnosis › Steering › Power Steering System › Repair Instructions › Power Steering Gear Heat Shield Replacement › Installation Procedure

Installation Procedure

    Fig 1: Removing/Installing Steering Rack
    GM293350Courtesy of GENERAL MOTORS CORP.
  1. Install the power steering gear heat shield.
  2. Install the power steering gear heat shield retaining bolts.

    Tighten:  Tighten the power steering gear heat shield retaining bolts to 9 N.m (80 lb in).

  3. Install the plastic clip to the power steering gear heat shield.
  4. Install the stabilizer shaft links. Refer to Stabilizer Shaft Link Replacement in Front Suspension.
  5. Lower the vehicle.
About FixVault