FixVault
Home › Buick › 2005 › LeSabre Custom, 4T65E/MN3 › Repair and Diagnosis › Accessories & Equipment › Communication Devices › Computer/Integrating Systems › Repair Instructions › Instrument Panel Module Replacement › Removal Procedure

Removal Procedure

  1. Remove the left sound insulator. Refer to Closeout/Insulator Panel Replacement - Left in Instrument Panel, Gages and Console.
    2. Fig 1: View of Instrument Panel Module Fasteners and Electrical Connectors
    GM428511Courtesy of GENERAL MOTORS CORP.
  2. Remove the fastener (2) from the instrument panel module (IPM).
  3. Rotate the IPM up and off of the instrument panel (I/P) retainer.
  4. Disconnect the electrical connectors from the IPM (1).
  5. Remove the IPM (1) from the vehicle.
About FixVault