FixVault
Home › Buick › 2005 › LeSabre Custom, 4T65E/MN3 › Repair and Diagnosis › Electrical › Charging Systems › Battery, Charging System And Starting System › Repair Instructions › Battery Replacement › Installation Procedure

Installation Procedure

    Fig 1: View of Battery
    GM288839Courtesy of GENERAL MOTORS CORP.
  1. Install the battery.
  2. Install the battery retainer and bolt.

    Tighten:  Tighten the battery retainer bolt to 17 N.m (13 lb ft).

    3. Fig 2: View of Battery Vent Tube
    GM288808Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Ensure the vent tube (1) is properly routed through the floor pan grommet.
  3. Install the battery vent tube (1) to the battery.
    4. Fig 3: Disconnecting Positive Battery Cable
    GM154778Courtesy of GENERAL MOTORS CORP.
  4. Connect the battery positive cable (1) to the battery.

    Tighten:  Tighten the battery cable bolt to 17 N.m (13 lb ft).

  5. Connect the battery negative cable. Refer to Battery Negative Cable Disconnect/Connect Procedure .
About FixVault