FixVault
Home › Buick › 2005 › LeSabre Custom, 4T65E/MN3 › Repair and Diagnosis › Engine Performance › System › Engine Controls - Introduction › Repair Instructions › Air Cleaner Element Replacement › Removal Procedure

Removal Procedure

  1. Remove the intake duct. Refer to Air Cleaner Intake Duct Replacement .
    2. Fig 1: View of Air Cleaner Element Cover, Air Filter Element and Retaining Clips
    GM869309Courtesy of GENERAL MOTORS CORP.
  2. Release the air cleaner element cover by lifting up on the retaining clips (2).
  3. Remove the air cleaner element cover (3)
  4. Remove the air filter element (1).
About FixVault