FixVault
Home › Buick › 2005 › LeSabre Custom, 4T65E/MN3 › Repair and Diagnosis › Engine Performance › System › Engine Controls - Introduction › Repair Instructions › Fuel Tank Pressure Sensor Replacement › Removal Procedure

Removal Procedure

  1. Remove the rear compartment floor trim.
    2. Fig 1: View Of Fuel Sender Access Panel & Bolts
    GM32756Courtesy of GENERAL MOTORS CORP.
  2. Remove the fuel sender access panel bolts.
  3. Remove the fuel sender access panel.
    4. Fig 2: Identifying Fuel Tank Pressure Sensor
    GM18839Courtesy of GENERAL MOTORS CORP.
  4. Disconnect the fuel tank pressure (FTP) sensor electrical connector.
  5. Remove the FTP sensor.
About FixVault