FixVault
Home › Buick › 2005 › Park Avenue Base › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transaxle - Introduction & Repair Instructions › Repair Instructions › Fluid Temperature Sensor Replacement › Removal Procedure

Removal Procedure

  1. Remove the case side cover. Refer to Case Side Cover Replacement .
    2. Fig 1: Removing/Installing Fluid Temperature Sensor
    GM773751Courtesy of GENERAL MOTORS CORP.
  2. Remove the end of the wiring harness assembly (2) with fluid temperature sensor (1) from the retaining clip.
  3. Disconnect the wiring harness connector from the fluid temperature sensor (1).
  4. Remove the fluid temperature sensor (1).
About FixVault