Identifying Intermittent Conditions

Many intermittent conditions occur with harness or connector movement due to engine torque, rough pavement, vibration or physical movement of a component. Refer to the following for a list to help determine an intermittent condition:

• Moisture, water intrusion in connectors, terminals and components
• Connector mating
• Terminal contact
• High circuit or component resistance - High resistance can include any resistance, regardless of the amount, which can interrupt the operation of the component.
• Harness that is located too tight or chaffed circuits
• High or low ambient temperature
• High or low engine coolant temperatures
• High underhood temperatures
• Heat build up in component or circuit due to circuit resistance, poor terminal contact or high electrical load
• High or low system voltage
• High vehicle load conditions
• Rough road surface
• Electro-magnetic Interference (EMI)/circuit interference from relays, solenoids or other electrical surge
• Incorrect installation of non-factory, aftermarket and after factory add on accessories

If an intermittent is determined, refer to Testing for Intermittent Conditions and Poor Connections for specific strategies in diagnosing intermittent conditions.