FixVault
Home › Buick › 2006 › Lucerne CX › Repair and Diagnosis › Steering › Power Steering System › Repair Instructions › Steering Gear Heat Shield Replacement › Installation Procedure

Installation Procedure

    Fig 1: Removing/Installing Steering Rack
    GM293350Courtesy of GENERAL MOTORS CORP.
  1. Install the power steering gear heat shield.
    2. NOTE: Refer to FASTENER NOTICE .
  2. Install the power steering gear heat shield retaining bolts.

    Tighten:  Tighten the power steering gear heat shield retaining bolts to 9 N.m (80 lb in).

  3. Install the plastic clip to the power steering gear heat shield.
  4. Install the stabilizer shaft links. Refer to Stabilizer Shaft Link Replacement .
  5. Lower the vehicle.
About FixVault