Circuit/System Testing
WARNING: This page is about a different car, the 2007 Isuzu Ascender, 2007 GMC Envoy, 2007 Chevrolet TrailBlazer, and 2007 Buick Rainier. However, it is still accessible from the selected car via links, so may be relevant.
- Place the transmitter on the test pad of the J 43241
and press each button of the transmitter one at a time. The tester should sound a tone and illuminate a green light when the panic button is pressed.
- If the tone does not sound and the green light does not illuminate, replace the transmitter.
- Verify the scan tool Last FOB Button Pressed parameter responds to the panic function on the transmitter.
- If it does not respond to the panic function, replace the LGM module.
- Verify that the headlamps pulse ON and OFF when the panic button is pressed.
- If they do not pulse ON and OFF, refer to Diagnostic Starting Point - Lighting Systems .
- Refer to Diagnostic Starting Point - Horns .