Removal Procedure

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.

Remove the end cap on the side of the instrument panel (I/P).
Pull out to remove the tweeter speaker wire clip from the I/P.
Disconnect the speaker wire from the I/P electrical harness.
Remove the windshield garnish molding. Refer to Windshield Pillar Garnish Molding Replacement .

Fig 1: Identifying Front Windshield Pillar Speaker

Courtesy of GENERAL MOTORS CORP.

Pull the speaker wire up through the I/P.
Remove the speaker from the vehicle.