FixVault
Home › Buick › 2007 › Allure CXS › Repair and Diagnosis › Body & Frame › Windows › Fixed & MOVEABLE Window Systems › Repair Instructions › Quarter Window Replacement › Removal Procedure

Removal Procedure

    Fig 1: Quarter Panel
    GM506224Courtesy of GENERAL MOTORS CORP.
    CAUTION: If a window is cracked but still intact, crisscross the window with masking tape in order to reduce the risk of damage or personal injury.
    IMPORTANT: Before cutting out a stationary window, apply a double layer of masking tape around the perimeter of the painted surfaces and inner trim of the window.
  1. Remove the rear quarter upper trim. Refer to Rear Quarter Upper Trim Panel Replacement .
  2. Remove the rear quarter lower trim. Refer to Rear Quarter Lower Trim Panel Replacement .
    3. CAUTION: Refer to Glass and Sheet Metal Handling Caution .
    IMPORTANT: Keep the cutting edge of the tool against the window. Do this from inside the vehicle to protect the outer painted surface.
  3. This will allow the urethane adhesive to be separated from the window:
    • Leave a base of urethane on the pinch-weld flange.
    • The only suitable lubrication is clear water.
    • Use J 39032  or equivalent in order to remove the window. See Special Tools .
    • Remove the quarter modular window from the pinch-weld flange.
About FixVault