FixVault
Home › Buick › 2007 › Rendezvous CX › Repair and Diagnosis › Body & Frame › Ignition Switch/Steering Lock › Immobilizer System › Repair Instructions › LED Indicator Replacement - Vehicle Security System › Installation Procedure

Installation Procedure

    Fig 1: I/P Trim Panel Component View
    GM314813Courtesy of GENERAL MOTORS CORP.
  1. Connect the security indicator lamp electrical connector to the security indicator lamp.
  2. Install the security indicator lamp (3) to the instrument panel upper trim:
    1. Insert the lamp.
    2. Rotate the lamp clockwise to approximately 1/4 turn.
  3. Install the instrument panel upper trim. Refer to Instrument Panel Upper Trim Pad Replacement .
About FixVault