FixVault
Home › Buick › 2008 › Allure CX › Repair and Diagnosis › Accessories & Equipment › Entertainment Systems › Cellular System, Entertainment System, And Navigation System › Repair Instructions › Front Upper Speaker Replacement › Installation Procedure

Installation Procedure

  1. Position the speaker on the I/P.
  2. Slide the wire down through the I/P to the end cap.
  3. Connect the wire to the I/P harness.
  4. Press the wire clip onto the I/P.
  5. Press the end cap onto the I/P.
    6. Fig 1: Identifying Front Windshield Pillar Speaker
    GM758477Courtesy of GENERAL MOTORS CORP.
  6. Press in the speaker (1) until it is fully seated on the garnish molding.
  7. Install the windshield garnish molding (2). Refer to Windshield Pillar Garnish Molding Replacement .
About FixVault