FixVault
Home › Buick › 2008 › Allure CXS › Repair and Diagnosis › Engine Performance › System › Engine Control System & Fuel System - 3.6L - Introduction (2 Of 2) › Repair Instructions › Barometric Pressure Sensor Replacement › Removal Procedure

Removal Procedure

    Fig 1: Identifying Barometric Pressure Sensor And Electrical Connector
    GM945437Courtesy of GENERAL MOTORS CORP.
  1. Turn the ignition OFF.
  2. Remove the sensor electrical connector.
    3. Fig 2: View Of BARO Sensor
    GM1285192Courtesy of GENERAL MOTORS CORP.
  3. Remove the barometric pressure sensor bolt.
  4. Remove the barometric pressure sensor.
About FixVault