FixVault
Home › Buick › 2008 › Enclave CXL, AWD › Repair and Diagnosis › Accessories & Equipment › Collision/Avoidance › Object Detection System › Diagnostic Information and Procedures › Rear Vision Camera System Malfunction › Circuit/System Testing › Rear Vision System Always On

Rear Vision System Always On

  1. Ignition OFF, disconnect the harness connector at the rear view camera image display module.
  2. Ignition ON, vehicle in PARK, verify a test lamp does not illuminate between the control circuit terminal 1 and ground.
    • If the test lamp illuminates, test the control circuit for a short to voltage. If the circuit test normal, refer to Backup Lamps Malfunction .
  3. If all circuits test normal, replace the rear view camera image display module.
About FixVault