FixVault
Home › Buick › 2009 › Allure CX › Repair and Diagnosis › Engine Performance › System › Engine Control System & Fuel System - 3.8L - Introduction › Repair Instructions › Accelerator Pedal Position Sensor Replacement › Removal Procedure

Removal Procedure

    Fig 1: Identifying Accelerator Pedal
    GM910941Courtesy of GENERAL MOTORS CORP.
  1. Remove the left instrument panel (I/P) sound insulator. Refer to INSTRUMENT PANEL INSULATOR PANEL REPLACEMENT - LEFT SIDE .
  2. Disconnect the accelerator pedal position (APP) sensor electrical connector.
  3. Remove the accelerated pedal bolts (2).
  4. Remove the accelerator pedal (1) from the vehicle.
About FixVault