FixVault
Home › Buick › 2009 › Allure Super › Repair and Diagnosis › External Pages › Different variant/trim › Section 2 (Engine Control System & Fuel System - 3.8L - Introduction) › Repair Instructions › Air Cleaner Element Replacement › Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: View Of Air Cleaner Element
    GM1207827Courtesy of GENERAL MOTORS CORP.
  1. Install the air cleaner element (1) to the air cleaner housing (2).
    2. Fig 2: Identifying MAF/IAT Sensor
    GM1208107Courtesy of GENERAL MOTORS CORP.
  2. Install the air cleaner cover, and clip the cover retaining fasteners (4).
  3. Install the air cleaner intake duct. Refer to Air Cleaner Inlet Duct Replacement .
About FixVault