FixVault
Home › Buick › 2009 › Lucerne Super › Repair and Diagnosis › Engine Performance › System › Engine Controls And Fuel - 4.6L - Introduction › Repair Instructions › Engine Coolant Temperature Sensor Replacement › Removal Procedure

Removal Procedure

CAUTION: Use care when handling the coolant sensor. Damage to the coolant sensor will affect the operation of the fuel control system.
    Fig 1: Locating Engine Harness Electrical Connectors
    GM1663209Courtesy of GENERAL MOTORS CORP.
  1. Remove the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement .
  2. Drain the cooling system. Refer to Cooling System Draining and Filling (Vac-N-Fill) or Cooling System Draining and Filling (Static Fill) .
  3. Disconnect the engine harness electrical connector (6) from the engine coolant temperature (ECT) sensor.
    4. Fig 2: Identifying ECT Sensor
    GM1670866Courtesy of GENERAL MOTORS CORP.
  4. Remove the ECT sensor.
About FixVault