FixVault
Home › Buick › 2010 › Lucerne Super › Repair and Diagnosis › Accessories & Equipment › Drivers Assistance Systems - ADAS › Object Detection System › Repair Instructions › Rear Object Sensor Replacement › Removal Procedure

Removal Procedure

    Fig 1: Rear Object Sensor & Housing
    GM1699865Courtesy of GENERAL MOTORS CORP.
  1. Remove rear bumper fascia. Refer to Rear Bumper Fascia Replacement .
  2. Disconnect electrical from the rear object sensor.
  3. Lift the locking tabs on the housing and remove the rear object sensor.
About FixVault