FixVault

Component Testing

WARNING: This page is about a different car, the 2010 Buick LaCrosse. However, it is still accessible from the selected car via links, so may be relevant.

Static Test

  1. Ignition OFF, disconnect the harness connector at the S48E Multi-Function Switch Module - Center Console.
  2. Test for infinite resistance between the signal circuit terminal 7 and the ground circuit terminal 2 with the switch in the released position.
    • If less than the specified value, replace the S48E Multi-Function Switch Module - Center Console.
  3. Test for less than 5 Ω between the signal circuit terminal 7 and the ground circuit terminal 2 with the switch in the pressed position.
    • If greater than the specified value, replace the S48E Multi-Function Switch Module - Center Console.